I am installing my new Side View Mirrors with LED directional signals built in and something is wrong. I am using the T-Tap connectors tapping into the Directional wires. I unplugged the wire plug to the direction light that is part of the headlight and tapped into those wires, black to black etc, the lights in the mirror worked great, plugged the headlight directional back in and it all worked great, then 30 40 seconds later it all stopped working. If I turn the directional switch off and then right back on it works and then shuts off again, checked all the connections again and again. Can not be an overload, LEDS do not use much juice. could those t taps be an issue??