state of charge meter

[jpl0413]

I am trying to hook up a digital SOC meter. The instructions show that there should be 5 tabs on the back of my key switch and there are only 4. According to the schematic I need to hook up one of the wires from the meter to that 5th tab on the key switch. Do I need to make a "Y" splitter and come off of one of the other tabs?
My local cart shop said that but when i do the meter stays on all the time.
Any help is appreciated.

 

[Batman]

I think mine only had 3 terminals on the back of the switch but I cant really remember. The meter only has 3 wires and you shouldn't need a y. I used the diagram thats on this forum in the e-z-go resources

 

[Batman]

Heres the diagram I used. Come to think of it the one connector on my cart that is plugged into the key switch had a dual connector so you could plug a second wire into the connector.

EZGO - State of Charge Meter - Golf Cart Wiring Diagram

 

[2Slow]

Thanks, that also helped me with my cart.