Radio on 2007 E-Z-GO ST 2+2

[motormouth27]

I have a 2007 ezgo st 2+2 and I was wondering what is the deminsions on the dash mount location?

Here is the site I seen it at and the radio;

https://www.overtons.com/modperl/product/de...ails_box_holder

Is it a good deal, will it fit in the dash mount location
They told me that the deminsions are 7width 7 depth 2 height

 

[HotRodCarts]

It should fit with no problem.

 

[StreetGlide]

I agree with HRC.

I checked to see and mounting cut-out is "standard" 182mm x 53mm. A template comes with it. Just be careful cutting, not much room for error and still fit correctly.

 

[motormouth27]

Where is a good spot to mount the speakers because it comes with 4 and I was wondering what I could do with the other 2 speakers because I was going to mount 2 of them on the body by the forward and reverse. Would the under glow be able to hear the music so it can flash to the beat of the music.

 

[motormouth27]

can some one please help?

With deciding on I was going to mount 2 of them on the body by the forward and reverse. Would the under glow be able to hear the music so it can flash to the beat of the music.

 

[BadToTheBone]

With the speakers mounted in the body by the f/r switch the neons should work fine as long as the sensor for the lights is under the seat somewhere.

 

[motormouth27]

Do I need an antena for it and what one is a good and where do most people mount them at?

 

[HotRodCarts]

I use a hidden antenna on my carts. It's basically just a dipole (2 wires with a plug on the end). A marine antenna will work well. Make sure you mount it to plastic and not metal.

You can get the dipole antenna at Radio Shack or BU.