Need G8 Electric help

cheapjeep2

New Member
Old 36v G8 no run condition. It appears that the solenoid it not being activated as there is no click, if I jump the solenoid with a 6Ga wire I get a spark, but the cart runs in forward and reverse, if I break the connection at the solenoid again, I don't get another spark. The switch at the pedal is shot, but even if I jump these wires together I still get no go or activation of the solenoid. Solenoid is good.

Anyone have a manual for a G8?
 

cheapjeep2

New Member
yea, I have the wiring diagram but it's not provide much help. Key Switch is good, Pedal switch is bad but have bypassed it, mircro-switch on F/R is good. Kinda at a loss on this one, bypass solenoid and we're good just have to get the control circuit for the solenoid figured out.
 
Top