Help With EZGO Brakes

joshuam5

New Member
Hey guys,

Your help with the wiring was awesome and the lift kit and wiring is working very well but my EZGO brakes are non-existent. I got new brake shoes but still no luck, we play with the adjustment screws and i still have to put my foot through the floor board like Fred Flintstone and the blisters on my feet are getting bad.

Any help would be great!

Thanks
Josh

ps. its a 94 marathon
 

HotRodCarts

Cartaholic
Do the cables have slack in them. If so theres a adjustment under the cart by the brake pedal for adjusting the cables.
 

scubasteve

New Member
I haven't come across a reason to get intimate with the brakes on any of our carts. But since I put that lift kit on our EZGO, the brakes seem softer. Not too much but enough to notice. In my case, the first thing I am going to do is adjust the cables a bit. If I were in your situation, putting my foot through the floor, I'd check the pads in the drums before I touched the cables.

sS
 

joshuam5

New Member
Already changed out the brake shoes. Will check out the cable slack and let you guys know. Thanks for the replies.

Josh
 
Top