EZGO Valves Won't Stay Adjusted


New Member
i have a 95 ezgo gas 4 cycle with a 295 robins. the problem i have is the adjustment nuts on the top of the valves keep coming loose. is there any way to resolve this.


Cartaholic - V.I.P.
if you are snuggin' the nuts up and there still backing off i would say that the threads in the rocker arms are bad or the adjusters are backed out so far that there are not enough threads left for the adjuster to stay tight. do they all come loose? or just the center two.


Cartaholic - V.I.P.
what has happened is the temper/hardening has come out of the valves, very common for this engine. running the governor up adds to this problem, replacing the valves or installing a rebuilt head is the only repair.
the valves will sink up into the head if they get bad enough.