Ezgo grounded wrench on positive and negative

Gabe

New Member
Hi new guy here. I have a ezgo txt pds and while i was putting the cables back on the motor the wrench touched both teminals and sparked out. I finished up and put in reverse to leave and it moved fine till i came to a stop and flipped the switch and Now the cart wont move. I can hear the clicking but thats it. Any help would be appreciated.
 

HotRodCarts

Cartaholic
Was the run tow switch in the tow position when the wrench shorted on the motor terminals? If the switch was in the run position when this happened chances are your controller is bad.
 

GarageBuilt

Well-Known Member
If I'm thinking right on the pds with the key switch off you can flip the forward and reverse switch up & down six times and then count the beeps . The code should be on the cover of the controller box.
 
Top