EZGO 295cc Compression

bunmcgee

New Member
Hey guys, anyone have an estimate on how much the cranking compression should be on a 1994 EZGO 295cc engine? I ran a check cold and came up with 60psi on both cylinders, good or bad? Thanks appreciate the help.
 

Nubs

Cartaholic - V.I.P.
yep, 155 is about the bottom line with those

did ya check it with the throttle wide open? have you set the clearance on the valves.
 

bunmcgee

New Member
I did set the valves beforehand, but didn't open the butterfly. This kart belongs to a neighbor and I was just lending a hand. I'll try again with the carb open and then pass along the bad news. Thanks for the help.
 
Top