I have a 1989 E-Z-GO 2 stroke golf cart and where the linkage hooks up to the rod that goes in to the carburetor body it is a bit wobbley where it enters the carb, like a seal is worn out. Would like to know if there is a rebuild kit that would fix this or if I need to get a new carb. If a new carb is the answer, where is a good place to get one and what model would I ask for. The s/n is 554590, manfc code is K 1989. The only thing I can find on the carb is V18. Thanks for any help. ONe other thing, I have had to run it with the choke on about 90% to keep it running. I haven't run it in about 2 months and now it won't start. I shot a quick sqirt of starting fluid and it fired for just that moment. I also pulled the fuel line at the carb and it is getting fuel to that point.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
E-Z-GO Carburetor Rebuild Kit
- Thread starter cartkid
- Start date