Ok, I put some longer bolts in the cover and jammed it with a stick of wood.
Cover is off, spring is out.
The spring I have is a lot bigger then the stock one, is this right?
Looks like it will take some doing to get the cover back on.
that don't sound right, should slip right in and stick out of the cover about 3/4. where did ya get this spring from?
if the spring is bigger than the hole it will catch on the cover and not compress when ya draw down the outside cover.
Just put it in. It does make a difference, not huge but enough for it to be worthwhile, as far as I can tell running it around the yard. The real test will be going up 20' sand covered river banks at the campground. Every little bit counts when you only have nine 17 year old circus ponies.
you won't feel much on the flats. been workin' on a polaris atv clutch that mates to the ez go steel back mount, the polaris has a lot heavier weights which helps grab the belt harder, still workin' on the right spring pressure. it'll choke a 9hp off on a hill before it'll slip