Converted to Lithium 48 Volt - Super Slow

[Pat911]

A drop of a couple of volts is acceptable, anything more and there’s a bad cable/connection/solenoid.

 

[Elmerfud67]

A2 cable from controller to motor is getting hot. All other cables are cold

 

[Pat911]

Check that connections are tight. Replace or re-terminate it if connections are already tight.

 

[Elmerfud67]

Pat911,
I really appreciate all your help. When checking to see if cables and lugs were tight I found the large lug on the motor was loose and would turn or try to when tightening cables. I was using 2 wrenches. But decided to pull the motor and investigate

 

[Elmerfud67]

Ended up putting new brush holder and lug insulators as well as new cables from controller to motor.
Problem fixed.
Thanks again

 

[HotRodCarts]

Glad you found the issue and thank you for the follow up.