Bad Wiper Switch Symptoms?

Doc

Member
Does anyone have a way of testing the wiper switch on a 48V 2000 CC? I suspect mine might be bad, but not too sure. You step on the acc. and the cart lurches forward about an inch and then nothing....it won't do reverse either. The batts are all reading between 8.4 & 8.3. Total pack reads 50.2 When you attempt to accelerate the batts voltages DO NOT change at all. The solenoid tested OK. My only other guesses are the key switch (not likely) , the f/w switch, the controller (hope not) or the motor itself. By the way, I get a *very slight* electrical smell coming from the wiper switch when I removed the cover. All connections are clean & tight. The blue wire going to the f/r switch had to be re-crimped and re-tightened as it was somewhat frayed at the end. All is well there now. Any input or ideas on what else to shoot for? I've been told to get a controller, but I REALLY want to be sure. TIA!
Doc
 
Top