Bad controller?

WD46

New Member
My '95 G14 won"t go. I've checked or had checked everything but the controller, all check out ok. All 4 posts on the motor show 36 volts at the same time regardless of the F/R switch position. Somehow that just does not seem right? Is the controller the culprit? Thanks for any help!
 

WD46

New Member
Sorry for responding slowly but I was unable to use my computer. The motor and everything else has been checked and appears ok. At this point I have sent the controller out to be rebuilt. When I get it back and installed I will post the results. Hopefully it will work. Thanks again.
 

BadToTheBone

Moderator
Good luck with the rebuilt controller.
yikes2.gif
I tried that twice and wound up buying a new one. Let me know where you bought the rebuilt controller and how it works for you.
 
Top