Hello all, my cart is a 98 fleet with a GE 4hp 4400 rpm motor and an alltrax 400 amp controller. I removed the stock motor and replaced it with this one. It worked great than it just shut down after about 2 blocks. I stepped on the accelerator a few times and it started going and then shut down soon after. Towed it home and it started to work again. When I press the accelerator very lightly the tires start spinning as if I floored it and cuts in and out. Press it a little more and it’s normal. It’s not smooth like it should be when trying to move a few inches forward. I checked for melted cables and checked all cable connections and when cart was dead I could hear the controller clicking.