New Caddie here to pick your brains cause mines shot
from tracing and re tracing the wires on this stretch Shriner cart. (History) At the end of our last Parade one of the wires melted on the F/R switch. This was one of the passenger side wire, or the lead to (A-1) on the motor if your looking at a schematic. The previous maintenance was nill so I was asked check it out. I checked it and re wired according to the schematic and it still wont go.
Both micro switches ohmed good , The Solenoid was not clicking so it was tested then replaced, added a toggle switch to replace the lost key switch, re connected the rev buzzer. 36v on the batts, all cells checked good except 1 which was low. When in forward or reverse you push the Go stick the micro switch clicks on the wiper but the solenoid still doesn't click. It's probably something simple that I am just over looking.
Thanks for all you do, and have a Merry Christmas and a Happy New Year
Thanks for all you do, and have a Merry Christmas and a Happy New Year
