42 Volt Battery Charger
- Thread starter kangolfer
- Start date
42v chargers are rare and to the best of my knowledge were only used on Western Carts. Westerns were nothing more than an Ezgo chassis with a custom body and 42v powering a 36v cart.
My charger is a 25 amp, Lestronic ll, model 14390. The current list price for this charger new is $646.
The UPS Quote I got was $39.41
Ship To:
67219, UNITED STATES
Ship From:
95747, UNITED STATES
Shipment Date:
Monday, February 21, 2011
Total Shipment Weight:
40 lbs.
Feel free to PM me an offer and don't worry about insulting me with a low ball number.
You gotta start somewhere right?
My charger is a 25 amp, Lestronic ll, model 14390. The current list price for this charger new is $646.
The UPS Quote I got was $39.41
Ship To:
67219, UNITED STATES
Ship From:
95747, UNITED STATES
Shipment Date:
Monday, February 21, 2011
Total Shipment Weight:
40 lbs.
Feel free to PM me an offer and don't worry about insulting me with a low ball number.
You gotta start somewhere right?
Your gain would be 15%+ in speed and torque. My stock 36v cart went 21 mph on 42v with the stock Ezgo fleet speed motor.
Sorry but I can't pick up the freight.
I have a lot of 42v carts in my area and these things sell for $250 used, if the number is too high for you, I understand.
Sorry but I can't pick up the freight.
I have a lot of 42v carts in my area and these things sell for $250 used, if the number is too high for you, I understand.
I originally had a Curtis 1205 footprint controller so nothing else was changed other than to add 1 battery. It ran like that for 9 years.
Some 36v controllers will take the extra 6v but it leaves them right on the edge of the high limit cutoff.
What controller do you have? If it's a Curtis mounted vertically, the model and voltage is on the bottom facing the ground. Is it about 9 1/2" long or 6 1/2" long?
Some 36v controllers will take the extra 6v but it leaves them right on the edge of the high limit cutoff.
What controller do you have? If it's a Curtis mounted vertically, the model and voltage is on the bottom facing the ground. Is it about 9 1/2" long or 6 1/2" long?
I just installed a new alltrax 4484es controller(400a), the one i took out was a ez-go with no numbers on it. It sat at an angle with a cover on it. I ordered a new solenoid(#586) to go with it. I just got off the phone with Chuck at EMP to see what all i would have to change, he said nothing just add a resistor on the new solenoid. If you still want to sell the charger I will take it. NOw how do we get together to finalize the deal. Tell me how you want to do it ,o.k., pay-pal,etc.
I think you figured it out because I got an email from you but not all the info I need. Let's do this an easier way, just send me an email [email protected] from your regular email address.