36 Volt Club Car Controller Wiring

[Paul Hillier]

I have a 1993 Club Car 36 volt with a solid state motor controller and all the wiring diagrams I find only have 3 large connections. This one has 4 and there are 2 6 gauge white wires left unconnected. If I thought it was safe to assume that they go to the A-2 term on the controller but you know what happens when you assume. Can anyone shed some light on this dilemma.

 

[HotRodCarts]

Does the golf cart run? What are the cables connected to at the other end? Welcome to the forum.

 

[Paul Hillier]

The cart did not run when I got it and some rocket scientist disconnected the controller the negative post on the battery pack was melted away and the cable to the charge receptacle was burnt I found a number of loose connections in the wiring I'm replacing all the batteries and any burnt wires one of the wires in question is connected to A-2 on the motor the other goes to the Fwd rev switch The A-2 term on the controller I think is the logical place but I'd feel better hearing from someone who knows

 

[Diode]

On my website I have an 89 to 93 Schematic that shows four large terminals and three small terminals on the left side

 

[Paul Hillier]

That diagram is perfect thank you very much and if I need a controller I know where to get it and thank you Cartaholics