2001 & up oil pressure gauge

[leeheli]

I'm wanting to add either and electrical or a mechanical after market oil pressure gauge from iequus gauges that match my other gauges that I have from them. I would like to know what oil pressure range a stock 11hp in a ezgo (2001 up) should be at. Has anyone else used a stock or aftermarket oil pressure switch with a gauge in the dash and if so what kind of pressure switch and the range of it. Thanks

 

[Nubs]

Welcome.

the oil pressure is around 28lbs cold and 10/15 warm with some rpm's. they drop to 2 or 3 at an idle, mechanical is what i use. not sure if a elect one would read right on idle

 

[leeheli]

do you use a copper or pvc line and is there a different type or high flow oil pump that I can use. Thanks

 

[Nubs]

use the pvc line. the pump is as good as it gets, it just turns to slow. i like to put in a 90 degree elbow and run the line out next to the carb, you may need to run a 1/8 pipe tap in the threads to get the nipple/fitting to start. if so, put grease on the tap to catch any metal.

 

[leeheli]

great pic, it helps me out alot. Do you any other pics of other mods or your dash with gauges. i want to put a volt gauge, oil pressure, and fuel sending unit in tank and gauge as well. Thanks again.

 

[Nubs]

thats all i got, sounds like you have a plan! post pictures as you go. we like pictures good luck with your project