1998 EZGO Solenoid Clicks But Wont Run


New Member
I have changed out every part I can think of except for new motor on a 1998 EZGO. When gas is depressed solenoid clicks but won't engage. Solenoid at first wouldn't click and ran down Neg wire from Controller B- to Solenoid burnt. Changed out and now clicks when pressed. I have went through the trouble shooting tree and got to step 23 24. Voltage between Controller B- and Pin 2 is 14v and it says to unplug the 4 pin pedal connector which I don't have because someone has hard wired them together. Anybody have any ideas?


  • Screenshot_20220915-220130_Chrome.jpg
    79.1 KB · Views: 4