HEEEELP, I was replacing a broken cable on cart and i had the two cables touching when I
went to see if it would run took off like a wild man and then quit.
I changed the potentiometer and still have nothing. Ohmed the motor and its good. I Run a jumper from yellow wire on selinoid to ground to jumb OBC and I finally got a solenoid click doing that but still no go can anyone help or tell me how to check controller. or any sugestions on what it could be
went to see if it would run took off like a wild man and then quit.
I changed the potentiometer and still have nothing. Ohmed the motor and its good. I Run a jumper from yellow wire on selinoid to ground to jumb OBC and I finally got a solenoid click doing that but still no go can anyone help or tell me how to check controller. or any sugestions on what it could be
